SSブログ

銀河鉄道の父

門井慶喜(著)
宮沢政次郎から見た賢治を書いた小説である。
政次郎は商売を成功させたが、賢治という病気がちな息子を持ち、賢治を含む二人の子供に先立たれた人物である。
悩み迷いながら我が子を育てていく、父の姿が書かれていた。

賢治は盛岡中学(現在の盛岡一高)でおそらく挫折し、その後の人生で苦労した。
政次郎はそんな賢治の理解者でもあったようである。

賢治は「雨ニモマケズ」を死の床で書いたそうで、丈夫な体になりたいという思いが込められているのだと気づいた。

銀河鉄道の父 (講談社文庫)

銀河鉄道の父 (講談社文庫)

  • 作者: 門井慶喜
  • 出版社/メーカー: 講談社
  • 発売日: 2020/04/15
  • メディア: Kindle版



銀河鉄道の父 (講談社文庫)

銀河鉄道の父 (講談社文庫)

  • 作者: 門井 慶喜
  • 出版社/メーカー: 講談社
  • 発売日: 2020/04/15
  • メディア: 文庫



2023-05-21 17:16  nice!(1)  コメント(0) 
共通テーマ:

AirMac Express工場出荷時のデフォルトリセット後のIPv6の設定

AirMac ベースステーションをリセットする方法
https://support.apple.com/ja-jp/HT201945
にしたがい、工場出荷時のデフォルトリセットをした。
工場出荷時のデフォルトリセット (ファームウェアバージョン 7.9.1 を適用した AirMac Time Capsule 802.11ac および AirMac Extreme 802.11ac のみ)
ベースステーションを電源から取り外します。
リセットボタンを押し続けながら、ベースステーションを電源に接続します。リセットボタンは、ベースステーションのステータスランプがオレンジ色ですばやく点滅し始めるまで、6 秒ほど押し続けてください。
ベースステーションが再起動し終わるまで、1 分ほど待ちます。AirMac ユーティリティを使って、ベースステーションを再設定できるようになります。

たぶん工場出荷時のデフォルトリセット後のIPv6の設定値
airmacexpress.jpg

IPv6の設定が良く分からなかったので、ハードウェアリセットをして工場出荷時の設定に戻した。
これでも、外とはIPv6でもつながる。

AirPort Utility User Guide
https://support.apple.com/guide/aputility/modify-ipv6-settings-aprt2706/mac
によると、
 4. Click the Configure iPv6 pop-up menu, then choose one of the following options:
  ・Automatically: This is the default selection. Use Automatically if your ISP provides IPv6 addresses automatically.
  ・Manually: If your ISP provided you with specific IPv6 configuration parameters, choose this option to enter them manually, then do any the following:
   ・Set the IPV6 mode: Choose an IPv6 mode as instructed by your ISP. Native mode connects directly to an IPv6 network; Tunnel mode connects to an IPv6 network through an IPv4 network.
   ・If you choose Native, and if you want to share the IPv6 internet connection with devices on your network, select Enable IPv6 Connection Sharing.
   ・Enter the information from your ISP in the appropriate fields: IPv6 WAN address, IPv6 default route, IPv6 delegated prefix, and IPv6 LAN address.
  ・Note: If you are configuring for IPv6 Tunnel mode, you also need to enter the remote IPv4 address in the Remote IPv4 Address field.
  ・Link-local only: Choose “Link-local only” to limit IPv6 traffic to the local network.
なので、この設定で問題はないと考える。


2023-05-14 17:03  nice!(0)  コメント(0) 
共通テーマ:パソコン・インターネット

このブログの更新情報が届きます

すでにブログをお持ちの方は[こちら]